Contact Us: 423.870.5558
msi@metroservicesinc.com

Products

Infrared Burners

Infrared burners allow you to economically increase production rates by speeding up your process. Infrared heating also allows you to target specific areas with intense heat or simply provide uniform heat to the entire product. Gas fired infra-red heaters are highly efficient producers of infra-red energy that can be used in numerous heating applications. Their greatest uses to date have been in the heating of industrial and commercial buildings, spot and area heating, commercial food broiling and cooking and in process heating ovens.

premix-infrared-burners

Premix Infrared Burners

Two models — radiant wire screen or radiant ceramic element. Can be manifolded to provide a large radiant panel. Suitable for numerous industrial drying and heating applications.

Wire screen

  • 60,000 BTU/h/ft2
  • 163,000 kcal/h/m2
  • 190,000 W/m2

Ceramic

  • 112,000 BTU/h/ft2
  • 304,000 kcal/h/m2
  • 350,000 W/m2
redray-infrared-burners

Red Ray QC-12H

Special quick cooling and durable ceramic tile is used. (It is not a fiber matrix) Excellent resistance to water and thermal shock damage. Heat input for the QC-12 is 20,400 BTU/section/hr. @ 4″ w.c. manifold pressure. Burner face provides a wide radiating area of 48.5/in2/section. Durable gray iron casting eliminates the need for a cooling plenum. Sections can be attached to a manifold horizontally or vertically using our patented three-piece union connector. Manifolded burners can be installed in any position. Burners are simple to install on new or retrofit systems.

redray2-infrared-burners

Red Ray QC-12V

Special quick cooling and durable ceramic tile is used. (It is not a fiber matrix) Excellent resistance to water and thermal shock damage. Heat input for the QC-12 is 20,400 BTU/section/hr. @ 4″ w.c. manifold pressure. Burner face provides a wide radiating area of 48.5/in2/section. Durable gray iron casting eliminates the need for a cooling plenum. Sections can be attached to a manifold horizontally or vertically using our patented three-piece union connector. Manifolded burners can be installed in any position.

redray3-infrared-burners

Red Ray Model F

Model KN burners provide 8,000 BTU/in heat output at 6 1/2″ w.c.m.p. Models F (12″) and FH (7″) burners have 4,000 BTU/in heat output at 6 1/2″ w.c.m.p. Models KN, F & FH develop radiant temperatures to 1800°F with turndown ration of 4 to 1. High temperature versions available for use in ambients in excess, of 850°F.

premix-infrared-burners

Red Ray Model KN

Model KN burners provide 8,000 BTU/in heat output at 6 1/2″ w.c.m.p. Models F (12″) and FH (7″) burners have 4,000 BTU/in heat output at 6 1/2″ w.c.m.p. Models KN, F & FH develop radiant temperatures to 1800°F with turndown ration of 4 to 1. High temperature versions available for use in ambients in excess, of 850°F.